Product Range

  • Coupler

    A double female part used to connect straight lengths of pipes. Each side is fitted with a rubber seal to grip the joint and prevent leakage and backwash.



  • PP Pipes

    Pipes are fitted with a female socket on one end to allow a connection to other pipes. A specialized SBR 60 rubber seal is fitted into every pipe to allow for immediate usage. The other end of the pipe is a male plain end, with a chamfered edge, that is designed to align with the female socket.  



  • Bend 45°

    A bend between a male and female joints, to allow for directional change. The angle is at 45° to allow for continuous flow of drainage water and prevent stagnation and backflow.



  • Bend 45° (Female)

    A bend between a two female sockets, to allow for directional change. The directional change angle is at 45° to allow for continuous flow of drainage water and prevent stagnation and backflow. The female sockets on both ends replaces the need to install a coupling, lowering the overall cost of installation.



  • Bend 87°

    A bend between a male and female joints, to allow for directional change. The angle is at 87° to allow for continuous flow of drainage water and prevent stagnation and backflow.



  • Bend 87.5° (Female)

    A bend between a two female sockets, to allow for directional change. The angle is at 87° to allow for continuous flow of drainage water and prevent stagnation and backflow. The female sockets on both ends replaces the need to install a coupling, lowering the overall cost of installation.



  • Sanitary Tee Joint

    A double female fitting with one male fitting. All female joints are socketed and fitted with a rubber seal. The angle between the female sockets is curved to prevent the buildup of backpressure when utilized on a multi-floor main.



  • Branch 45°

    A double female fitting with one male joint at the bottom. All female joints are socketed and fitted with a rubber seal. The angle between the female sockets is 45°.



  • Double Branch 45°

    A triple female fitting with one male joint at the bottom. All female joints are socketed and fitted with a rubber seal. The angle between the female sockets is 45° each side of the vertical axis.



  • Branch 87°/ Tee Joint

    A double female fitting with one male fitting. All female joints are socketed and fitted with a rubber seal. The angle between the female sockets is 87.5° to prevent stagnation in drainage flow.



  • Reducer

    A fitting that connects the male end of a pipe, to the female end of a bigger pipe. It is used in connections of different sizes. This fitting has the female socket on the smaller end and the larger end of a male form.



  • End Cap

    A fitting used at the end of a line, to be inserted into the female end of a pipe. It is provided with a screw-on cap to be removed for cleaning purposes.



  • Rubber seal

    It is made of chemically resistant material (SBR 60) to protect it from deterioration from detergents and other chemicals that it might encounter during utilization. Dimensions and performance characteristics  of the seal shall are certified according to EN 681